Gas Engine Magazine

Looking for K Motor Information

By Staff

I have an engine that I have not been able to get any information on. There is no tag but “K Motor” is cast in the block. The engine weighs about 70 pounds, and it has a single cylinder and single flywheel. It probably is about 1/2hp with about a 3-inch piston.

A mag is connected directly to the back. Mag condenser has British, Canadian, and U.S. patents of 1915 date. It is 4-stroke, water-cooled, with no governor.

The carburetor side of the engine with two levers to adjust the fuel and air.

There are two levers on the carburetor to adjust fuel and air. There are two spark plugs in the head directly opposite each other. Whether there was an electrode and a ground originally or two plugs firing 3 inches apart, I do not know. The engine came to me from Chile. I suspect it might be British but don’t know. Any information would be appreciated.

Spark plug side of the engine

Please send your questions and comments for Flywheel Forum to Gas Engine Magazine, 1503 SW 42nd St., Topeka, KS 66609-1265 or email

  • Published on Mar 9, 2020
© Copyright 2022. All Rights Reserved - Ogden Publications, Inc.