Aultman Taylor Starting Systems, Myrick Engines and Speed Reducers
In response to Gary Yaeger's piece on Aultman & Taylor's 30-60 tractor (see GEM, April 2003, page 10):
The original Aultman & Taylor tractors did not have an impulse on the magneto. The air start was actually a dual ignition setup that was popular on early brass-era cars and many fire trucks. The coil switch had three stations; magneto, off and battery. The batteries were in a wood box on the floor of the platform.
To start, the coil switch was set to off, the air pump was given three or four quick strokes and the coil switch was then set to battery. At that point it should have been running, and after a short period the coil switch was turned to magneto. Aultman & Taylors were known to start easy and the coil switch would give trouble. Magnetos with impulse were installed and the air pump with coil switch was often removed.
Dan Ehlerding Jamestown, Ohio
Just got the latest GEM in today's mail and wanted to respond to query 38/4/2A concerning the Sprywheel engine. The engine is from a Sprywheel garden tractor from about 1920. I've included a copy of an ad that ran in Farm Mechanic's magazine in 1920 or 1921.
Dick Hamp 1772 Conrad Ave. San Jose, CA 95124
Thank you for publishing my letter in Gas Engine Magazine (see GEM, January 2003, page 8, query 38/1/3). I received many responses to my query, and the planter was identified before I even received my copy of the January GEM.
The planter is a Holland Transplanter, invented by two brothers to speed up hand planting of celery. They stopped farming in 1927 and started the Holland Transplanter Co. in Holland, Mich., and are still in business today. It's still winter here, and pictures of the Transplanter will have to wait awhile, but I have gotten a lot of information on its use. I would like to thank all who e-mailed, called and wrote letters.
Bill Varmum of Onalaska, Wis., was the first person to e-mail me with identification. He has a two-seater he has not yet restored. Working from his e-mail, my wife got the phone number of the Holland Transplanter Co. I talked to a Howard Poll, who sent me an old brochure about the Transplanter and some current Transplanter information. He did not know of a three-seater and was surprised that a Holland Transplanter found its way out to the West Coast.
I will send pictures of my restored Holland Transplanter to everyone who contacted me. This restoration project will be a summer time adventure, and you will be hearing from me again when it is done. Thanks again for all the help.
Frank J. Harkcom 11801 Alpine Dr. S.W. Port Orchard, WA 98367 email@example.com
I have been involved with old gas engines for the last 30 years, and while I know this is not a gas engine, it is related.
We see many engines and engine equipment restored and preserved, but what about some of the other old equipment these old engines moved, such as jackshafts, speed reducing sets and line shaft assemblies? I personally find them as interesting as gas engines.
The picture above shows a speed reducer with multiple take offs for flat belting. It was originally used in a woodworking shop for routing power to different machines. It was built by someone who had a good mechanical mind and was clearly built with a purpose.
We should be looking at all the equipment that deals with our hobby. Preservation, after all, is our goal.
William L. Rogers 17 Independence Lane Hannacroix, NY 12087
The engine on page 18 of the December 2002 issue is indeed a 3 HP Eclipse made by Myrick Machine Co., Olean, N.Y. I have never seen an AT. Jones or another Myrick like mine. Most Myrick engines are the 4 HP upright, and these are very different from the 3 HP. The 4 HP are very common and the valve mechanism is very different. There was also a small 1 HP Myrick.
My engine is a 3 HP, serial number 640, with a speed of 400 rpm. My engine has hot tube ignition, as when I bought it there was no ignition or ignition trip mechanism. The late Henry Horner (of Burns and Horner Co.) made my hot tube. I would very much like to hear from fellow owners.
Stan Matlowski 118 Hunlock - Harveyville Rd. Hunluck Creek, PA 18621 (570) 256-7422 firstname.lastname@example.org
As I remember, back around 1953 Successful Farming magazine ran a story with drawings and explanations of the engine's workings. There were two pistons in a horizontal cylinder, bouncing back and forth and generating gas pressure to drive the turbine. George R. Wool 3015 Lower Brush Valley Centre Hall, PA 16828
Send letters to: Gas Engine Magazine, 1503 S.W. 42nd St., Topeka, KS 66609-1265; email@example.com