RUSTY WHEELS OLD ENGINE CLUB OF ARKANSAS

1987 Show Report


| January/February 1988



1 HP Maytag engine and Aluminum gas Tank

Bud Kelso's 1 HP Maytag with aluminum gas tank.

SHOW NEWS

Box 24, Bluff City, AR 71722. Photos by Max Gunnels of Magnolia, AR 71753.

Rusty Wheels members have been quite busy the last several years completing two major projects. First, an 85 HP Bessemer engine used during the 1920's for cotton ginning was donated to the club by Mr. and Mrs. John Burke and Mrs. Gilbert (mother of Mrs. Burke), all of Hope. Second, a structure had to be built to house the historical antique engine. Hope's Fair Park was selected as the construction site. The engine would serve as an unusual exhibit at the annual Hope Watermelon Festival and Rusty Wheels Annual Engine Show.

After all the long hours, weekends, mad wives, near divorces, thousands of miles of travel and 100-degree weather in the Hope area, satisfaction finally came. The 1987 Hope show proved to be the best ever with the Bessemer running and the building virtually completed. There were 112 engines, four tractors, a hay baler, two grist mills, and two Model T Fords on display. Guests arrived early from Greenville, South Carolina, Dallas, Fort Worth, San Antonio, and Linden, Texas. Arcadia, Louisiana and Nashville, Tennessee were represented as 'first timers.' The tall, shady loblolly pines proved to be very comforting with the typical August weather.

We wish to thank all those who traveled from near and far to attend our regular shows-the Jonquil Festival at Old Washington, Arkansas in March; Hope Watermelon Festival at Hope, Arkansas in August; Forest Williams Show in Cabot, Arkansas in September; and the Heber Springs Arts and Crafts Festival at Heber Springs, Arkansas in October.

A special thanks goes to the Joe Freeman family for their help in the reassembly and the startup of the Bessemer engine. The old engine runs perfectly thanks to their fine tuning and adjustments. Also, thanks to Erwin Kretzschmar of Floresville, Texas, for letting us get a photocopy of the manual for the Bessemer engine. The building was completed quicker with the help of several non-members and people interested in our projects.

Interesting observations on some of our members: