Information Please!

| May/June 1975


Richard Alan Ambrose

I am a new subscriber to the Gas Engine Magazine and I enjoy it very much. What caused me to write is the picture of the Kenwood engine built by Stickney on page 41 of the July-August 1974 issue of the Gas Engine Magazine.

Well, I have a Stickney. The patent date on the coil says Feb. 19, 1907, August 29, 1911, so the date of the engine must be 1911. It is 1-3/4 h.p. My Great-Grandpap bought the engine brand new in a hardware store in Pittsburg, Pa. He handed it down to Grandpap who sold it to me for $5.00. It was always kept in a shed out of the weather and was in real good condition when I bought it. The only work me and dad had to do on it was put on a new gas line, free the igniter, and get a battery. I painted the engine all up and it runs real nice.

I am sending pictures of my engine with this letter.

You can see the igniter on the side of the engine and directly above it is the sight gauge for the water tank. The tank is not 'open' on the top like most others so the sight gauge is made necessary. The gas tank is on top of the engine and I have never seen this before. It is gravity flow the whole way. The carbureter sticks out in front and I have never seen this before either.

Picture  was taken at the Northwestern Pennsylvania Steam Engine and Old Equipment Association Show held in Middle Lancaster, Pa. August 1, 2, 3, 1974. It shows a close-up of the carburetor. The cast-iron muffler clearly stands out. The oil cup goes in through the side of the engine, instead of through the top. I have been told that the stem sticking out of the water tank is there so you can oil the exhaust valve rod. Also, the front of the engine is supported by a pivot pin.

Picture was taken at the same Show and it shows a back-view of the engine. You can see the location of the coil. The name-plate is clear in back of the engine and it helps cover the cam.