Readers' Engine Questions
38/8/1: Serial Numbers Q: I have the following engines and would like to know the year they were built: 1) International LA 1- to 2- HP, serial no. A64917; 2) Fuller & Johnson 1- HP, serial no. 83846; 3) Fairbanks-Morse Z, serial no. 522676; and 4) Massey-Harris Co. Ltd. Type 2, shop no. 6K3077. I do believe that last number seven belongs there, although it is not stamped as well as the number seven preceding it. Did someone other than Massey make this engine? Any help would be appreciated. Dan Janke, P.O. Box 285, Westfield, WI 53964.
A: The numbers you give for your IHC LA do not line up with what's shown in Wendel' s Notebook. If you've included one extra number, presumably the number seven at the end, it's of 1935 manufacture. But, if it were an end of production Type LAA, it would be of 1938 manufacture. Your Fuller & Johnson is a 1923 model while your FM Z was made in 1922.
The year of your Massey-Harris is unclear. Massey-Harris Type 2 engines were built from 1923 to 1932. The Type 2 came in sizes of 1-, 3, 4- and 6 HP. Yours should be a 6 HP, evident by its '6K' reference in the serial number. Massey-Harris started building its own engines in 1916, after it moved the manufacturing equipment of the Deyo-Macey Co., Binghamton, N.Y., (which Massey-Harris bought in 1910) to Weston, Ontario.
38/8/2: Unidentified Grader
I have come across a turn-of-the-century pull grader (no engine). Can anyone direct me to a preservation site or some place where they might know how 1 can get wheels and hubs to restore this thing? The blade, angles and bevels all seem to be in good working order after more than 100 years. Many thanks. Captain Jim, Aberdeen, Md.; e-mail: firstname.lastname@example.org
38/8/3: Lauson Engines
I am looking for any information I can get about the two Lauson gas engines I have. The first one is a 2 HP hit-and-miss engine. The following information is on the brass data plate.
Manufactured by the John Lauson Mfg. Co. New Holstein, Wis. USA
Speed: 525 No.: 67570
It has a belt pulley on the flywheel, Wico EK magneto and at this time is using a Champion W-10 spark plug. The other is a four-cycle, single-cylinder engine. The following information is on the data plate.
The Lauson Company
Model No.: 55S-111
Serial No.: 5179447
This engine has a small centrifugal clutch pulley on the output side of the crankshaft and at this time is using an Autolite 456 spark plug.
I wish to find out what year these engines were made, what spark plugs they use (ones I can readily obtain), what horsepower the four-cycle is, where or from whom to get parts and owner's and maintenance manuals, what decals if any were on them, and things like that.
Any information at all would be greatly appreciated. I can be contacted at the mailing and e-mail address. Thanks very much for any help and time. Eric G. Orndorf, 30 Markley Drive, York Haven, PA 17370-9600; e-mail: email@example.com
38/8/4: Unidentified Flywheel
Another auction prize! Nobody wanted it so the auctioneer threw it on my box of goodies. Other than a flywheel, what is it? The flywheel shows the number 9602 T on the inner rung and what appears to be a 'D' on the outer rung. Keith Rather, 7630 220th Road, Chanute, KS 66720.
38/8/5: 20 HP Titan
I'm chasing some information on a Type D 20 HP Titan tractor, and I'm trying to locate the following items:
Dimensions of the roof
Rear platform drawings and tow hitch drawings
Clutch for the belt pulley drawings
Throttle fuel system and hit-and-miss system
Magneto information (American Bosch)
Original paint colors and markings
Steering wheel and mountings drawings
Any tidbit of information would be helpful, no matter how small. 1 know I'm asking the world, but any help greatly appreciated. Alastair Geddes, 49 Main St., Redland Bay, Queensland 4165, Australia, or e-mail: firstname.lastname@example.org
38/8/6: 10 HP Witte
I have a 10 HP Witte with the enclosed crankcase, but I don't know how much oil should be in the crankcase. I know it has a splash oil system, in that it doesn't have an oil pump. It has a small metal pin about the size of a cotter pin that sticks down on the bottom of the connecting rod where it connects to the crankshaft. I'm sure this is to help splash the oil.
How high should the oil be up on the crank and connecting rod when the crank is in the down position? If anyone can help me or tell me where I can find this information, I would appreciate it. Thanks, William Walter, e-mail: email@example.com
38/8/7: Anderson Diesel
John Bickerstaff, Richmond, Va., called the offices the other day inquiring about an Anderson diesel he's come across.
John says the engine is a single-cylinder, 30 HP Model K, Type 22 Anderson made by Anderson Foundry & Machine Co., Anderson, Ind. Just when it was manufactured is unknown, but John seems confident it was some point in the early 1920s. John says the engine, which features air starting, has been in a flour mill most of its life. According to John it's not stuck and appears to be in very good condition.
John would appreciate any information on the engine, and would especially like to lay eyes on a manual. With any luck, he'd like to have the engine running by September in time for his local show. Contact John Bickerstaff at: 1010 Sharon Lane, Richmond, VA 23229; (804) 288-0639.
38/8/8: Wolfe Engine Info Sought
Some time ago, reader Phil Hayse sent in a newspaper clipping from the Lyons (Kansas) Daily News with a photo of a 2-1/2 HP Wolfe Gasoline Engine, identified as made by D.C. Wolfe, Lyons, Kan. The photo in the clipping is itself a reproduction, and won't make the transition of yet another generation of copying, hence its omission here.
The engine, a single-cylinder horizontal with twin flywheels and external cooling tank, was traditional in design. The photo as printed is referenced to the back page of the Sterling (Kansas) Bulletin centennial edition, published in 1900.
While stationary engine manufacturing was in full swing in various factories and shops around the country in 1900, that's still early in the history and development of the gas engine.
D.C. Wolfe has also been cited as the builder of one of the very first motorized cars in Kansas, a vehicle that was supposedly sold to Walter P. Chrysler when Chrysler lived in nearby Ellis, Kan. If anyone knows more about this early engine, we'd like to hear from you.
C.H. Wendel is a noted authority on antique engines and tractors. His books constitute a vital reference resource for collectors and hobbyists. If you have a query for C.H. Wendel, send it along to Gas Engine Magazine, 1503 S.W. 42nd St., Topeka, KS 66609-1265.