A BRIEF WORD
28/3/34 Frost & Wood Q. See the photos of a Frost & Wood mower made at Smith Falls, Canada. It was red with yellow wheels, and a blue sickle bar. When was it made, how long did the company last, and the like. Any help will be appreciated. Kevin F. Kurds, 1855 Bakertown Rd., Buchanan, Ml 49107.
A. Frost & Wood dated back to 1839. Cockshutt eventually bought out the Frost & Wood line, and in recent history, White Motors bought out Cockshutt.
28/3/35 Fairbanks-Morse Compressor Q. Please help me obtain information on a Fairbanks-Morse water-cooled air compressor. The name plate indicates 3? x 4 inch bore and stroke; the s/n is 11277. It is a vertical, single-cylinder design with a single pulley/fly wheel. Any information will be appreciated. Roy Childers, 303 Scoates Hall, College Station, TX 77843-2121.
28/3/36 Maynard Engine Q. I have a Maynard, from the Charles Williams Stores, s/n W14245. It has a Webster magneto and 16-inch flywheels. What is its age, its horsepower, and the proper color scheme? Any help will be appreciated. Gordon S. Braislin, 3 Jericho Rd South, Sherman, CT 06784.
28/3/37 Power Master Q. See the photos of a Power Master, s/n 20023, Model 2104,6 volt, 150 watts, 2225 rpm. The carburetor has a brass air cap, brass fuel needle, and brass intake pipe. The motor has a push button electric start. Can anyone tell me anything further about this unit? Dennis Dingman, Route 3, Box 32C, Harden, ID 83835.
28/3/38 Lombard Saw Q. See the photo of a Lombard on which I have no information. It has never been rebuilt and runs well, but is very heavy and very loud. Any help will be appreciated. John Laudano, 666 Ridge Road, Middle-town, CT 06457-5412.
28/3/39 Unidentified Implement Q. See the photo of an unidentified implement (Photo 39A), the bar is 28 inches wide and 42 inches long. 'YODER 1913' is cast inside the rear wheels. In Photo 39B is a small grinder, and I would like to know what make it is. Any help will be appreciated. Edward Minnick, RR 1, Box 140, Bainbridge, IN 46105.
A. We'll take a stab at 39A. We think it is a corn cutter that was pulled by horses. However, we're not sure if the side pieces are sharpened or not. The idea was to drive alongside a row of corn and this outfit would shear off the stalks so that others could come behind and tie them into bundles of corn fodder.
28/3/40 Ottawa Mule Team Q. See the photo of an Ottawa Mule Team tractor from Ottawa Manufacturing Company. Any information, including the proper color scheme would be greatly appreciated. Jack Harrell, PO Box 142, Roanoke, IN 46783.
A. Can anyone help here? We're guessing this to be about 1940s, and vaguely recall seeing it advertised someplace about that time.
28/3/41 David Bradley Q. Can anyone provide the proper color number for the red used on David Bradley garden tractors? Paul Burkle, PO Box 1871, Waterloo, IA 50704.
A. We have the following Martin-Senior numbers: 90R3724 Green and 90R-3725 Red.
28/3/42 Thanks! To Vern Racek for sending along some further information on the Hercules Gas Engine Company at Evansville, Indiana. By the way, thanks also to those who sent us Greetings of the Season over the recent holidays!
28/3/43 A Restored Saw See Photos 43 A and 43B for a before-and-after restoration. The unit is mounted on an old Buick truck frame, and the engine is a 6 HP Fairbanks Morse 'Z' model. The head was broken and the cylinder was badly pitted. It took a year from start to finish, but it really saws wood now.
'I saw a saw in Arkansas that could out saw any saw you ever saw. If you ever see a saw that can out saw that saw I saw in Arkansas, I would really like to see that saw saw! Tom Beery, 24772 Hwy 108, Mi Wuk Village, CA 95346.
28/3/44 Sta-Rite Engine Q. I'm restoring the 1? HP Sta-Rite engine shown in the photos. However, it's different than the one shown in American Gas Engines. Mine has wick oilier on the mains, oilier behind the water hopper, carburetor, intake on side of head, cam gear inside housing, no gas tank inside the base, base is different, it uses a round pushrod, and has no model number. I need some parts and would like to correspond with anyone having one that would give me the right dimensions. Any help will be appreciated. John M. Preston, 2500 Curtis Rd., Leonard, MI 48367.
28/3/45 MacLeod Engine Q. See the two photos of a 1? HP MacLeod, s/n 3953. The plate lists 'Macleod's Ltd., Winnipeg, Canada' as the vendor. Can anyone advise who made the engine, and what magneto was originally used? Any information will be appreciated. Ted Burkey, 801 Eastridge Drive, Lincoln, NE 68510.
28/3/46 Hallicrafters Generator Q. We obtained a PE-108A Engine-Generator set made by Hallicrafters Co. of Chicago about 1942. Engine is a Wisconsin Model AA, but the engine is not the problem. What we would like to have is the electrical diagram for the generator and electrical part of the PE-108A so that we don't have to go through the trouble of tracing it and drawing our own schematic. Any help will be appreciated. Kenneth L. Roland, 3205 Circle Dr NE, Cedar Rapids, IA 52402.